Before Using For The First Time; Blender Foot; Universal Cutter - Bosch MSM6B7RE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
en
Before using for the first time
Before using for the first
time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all
accessories from the packaging.
■ Remove the packaging material that is
present.
■ Check all parts for completeness.
X Fig. A
■ Inspect all parts for visible damage.
■ Thoroughly clean and dry all parts
before using for the first time. X "Care 
and daily cleaning" see page 13

Blender foot

The blender foot is suitable for cutting
and mixing mayonnaise, sauces, blended
drinks, baby food, cooked fruit and cooked
vegetables, and for puréeing soups.
W Risk of scalding!
Take care when processing hot food. Hot
food may splash during processing. Leave
boiling food to cool down to 80 °C or less
before processing.
W Risk of injury!
After switching off the appliance, wait for
the blade in the blender foot to come to a
standstill.
Never grip the blade in the blender foot.
Caution!
– The blender foot must be securely
connected to the base unit. The blender
foot must not wobble or fall over.
– We recommend that the appliance is not
switched on for longer than is necessary
to process the ingredients.
– Solid foods such as apples, potatoes
and meat must be cut up and cooked
until soft prior to processing. Use the
universal cutter for cutting/chopping raw
food (onions, garlic, herbs etc.).
12
– The blender foot is not suitable for
preparing purées consisting solely
of potatoes or foods with a similar
consistency. For this purpose, use a
Bosch hand blender with the "ProPuree"
masher attachment.
X Fig. B
■ Prepare the desired food. Cut up large
pieces in advance.
■ Place the food in a suitable, tall and
stable receptacle or continue processing
the food in the cooking pot.
■ Completely unwind the mains cable.
■ Take hold of the blender foot, place the
base unit on the blender foot and rotate
in a clockwise direction until both are
securely connected.
■ Plug into the mains.
■ Take hold of the appliance with one
hand and immerse the blender foot.
Hold the receptacle firmly with your
other hand.
■ Press the On button. The appliance
remains switched on as long as the On
button is pressed.
■ Once the ingredients have reached the
desired consistency, release the On
button.
■ Unplug the mains plug.
Notes:
– To prevent the ingredients from
splashing, fully immerse the blender
blade in the ingredients.
– In the case of liquid foodstuffs, immerse
the blender foot and hold it at a slight
angle for better blending results and to
prevent the ingredients from sticking to
the bottom of the receptacle.

Universal cutter

The universal cutter is suitable for cutting
meat, hard cheese, onions, herbs, garlic,
fruit, vegetables, nuts and almonds.
With the universal cutter, you can use the
appliance at full power (according to the
recipe). Always observe the maximum
quantities in the table. X Fig. F

Publicité

Table des Matières
loading

Table des Matières