Publicité
Les langues disponibles
Les langues disponibles
GB - Table of contents
Safety instructions
Adjustment of depth skid and support wheels .
Cleaning and maintenance of tiller
Storage
Maintenanceplan of engine..
Technical specifications
List of accessories
Troubleshooting
Important
Certificate of conformity
Sparepart list
www.texas.dk
Our company is permanently working on further development of all machines and tools; therefore we
reserve the right to changes in case containing as regards form, technique, and equipment. Please
understand that no claims on the specifications and illustrations in this manual can be made.
Safety instructions
When operating the tiller follow carefully these safety instructions in order to prevent any accidents. Read the
whole operating instructions and make sure you understand the operating of the machine and of all the controls.
Make sure you are capable of stopping the machine immediately and switching off the engine in an emergency. All
directions of handling and maintenance of your tiller are also for your own safety!
-
The tiller is for personal use. The machine must not be used in any other way than described in the manual.
-
Use only genuine equipment and spare parts. If you use other spare parts it may at worst lead to an
accident, and is therefore not permissible.
-
Before the first use of your new machine follow the directions from your supplier or some other expert.
-
When using the tiller you are responsible for any third party in the area where the machine is in operation.
Never use the tiller while persons, especially children or animals, are near.
-
Do not allow persons under age to operate the tiller.
-
Pass the tiller on or lend it only to persons who are familiar with this type and with its handling. Always
pass on the safety and operational instructions.
-
Only allow steady and healthy persons with a good physical shape to operate the machine. When you feel
tired of working, have a break in good time. Do not operate the machine after having had alcohol.
-
Do not remove or cover the controls which are mounted on the tiller from the factory, for instance
removing the clutch lever from the handlebar.
-
Remember to tighten all bolts and nuts before start.
Working with the machine on a steep slope is dangerous!
Only use the machine on areas where it can be handled.
Clothing
-
For work with the tiller, clothing according to instructions is necessary. Wear close-fitting working clothes
(no overall), safety boots with steel toes and non-skid soles. Wear earplugs when working during a long
period.
..
..
..
"Take care of the revolving knives"
Note The motor is delivered without oil and gasoline.
...
..
.
..
..
..
..
..
.. 6
. 7
7
. 8
.. 8
. 15
17
27
. 31
. 32
Publicité
