Control Panel - Oceanic OCEAISHGB1000W Guide D'utilisation

CONTROL PANEL

Button Function
Standby
PRG To choose the weekly personalized program
To select Window detector function
M Mode comfort
Mode eco
Mode anti-freeze
P1 / P2 / P3 / P
OPERATION
1.Setting the time and turning on the device
After connection to the power supply:
Press to toggle between hours / minutes / day of the week (1-7). Press the button
to set the hours / minutes / day of the week. Press the button
setting and return to standby mode, otherwise after 10 seconds without action the unit will
automatically return to standby mode.
If the device is in operation (changing the time setting):
Press both
to toggle between hours / minutes / day of the week (1-7). Press the button
the hours / minutes / day of the week. Press any button other than
the setting, otherwise after 10 seconds without action the setting is automatically saved.
After setting the clock, the standby mode is activated.
and buttons at the same time and enter the time setting. Press
Page 29 of 38
to complete the
to set
or to save