Technical Specifications; Disposal - AEG KH 4225 BT Mode D'emploi

English
24
Troubleshooting
Symptoms Possible cause
Headphones Battery empty
cannot be
turned on
No audio Headphones are
signal during turned off
Bluetooth
Headphones are
connection
not paired with the
audio source.
Volume too low
Headphones Pairing does not
cannot be work
connected
Audio source is
turned off.
Bluetooth is turned
off on the audio
source.

Technical Specifications

Model: .............................................................................KH 4225 BT
Net weight: ............................................................approx. 0.112 kg
Battery: .........................................3.7 V 300 mAh lithium polymer
Charging time: .................................................... approx. 3.0 hours
Operating time: ................................................... approx. 10 hours
Bluetooth
Bluetooth support: ........................................................V3.0 + EDR
Range: ..................................................................approx. 10 meters
Transmitting frequency:.......................................................2.4 GHz
Protocols: ....................................................................A2DP, AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device complies with the relevant CE Directives and is
designed in accordance with the latest safety regulations.

Disposal

Battery disposal
Solution
Charge the battery
( Page 22)
Turn the Headphones
on.
Check whether the
connection exists. Pair
the Headphones with
the audio source again,
Environmental protection
if necessary.
Increase the volume on
the headphones
Increase the volume on
the audio source.
Check, whether the
audio source supports
the A2DP protocol.
Turn the audio source
on.
Turn the Bluetooth
function on in the audio
source.
The device has a rechargeable battery. Used
batteries and accumulators do not belong in
the household waste.
The batteries / accumulators must be
removed before the product goes into the
waste disposal. For this, consult qualified
specialized personnel.
Do not dispose of the device at the end of
its service life with normal household waste.
Bring it to the official collection point for
recycling. By doing this, you help protect the
environment.