Speaker Configuration - Ryobi P760 Manuel D'utilisation

Masquer les pouces

Table des Matières

Les langues disponibles

CONNECTING YOUR PRIMARY SPEAKER TO

Bluetooth

See Figure 3, page 14.

 Press the GEAR/POWER button to power on the Score

Primary Speaker.

 Continue to press the GEAR/POWER button until the

flashing "bt" logo appears on the LCD screen. This signi-

fies that the Primary speaker is looking for a Bluetooth

connection.

 Using your Bluetooth

P760 Score

under your setting for Bluetooth

™

nect.

 The "bt" logo will stop flashing on the LCD screen, sig-

nifying a successful Bluetooth

NOTE: If your Bluetooth

word, enter "0000" and the device will connect.

PRESET BUTTON

 If paired to a Bluetooth

PRESET button for more than 2 seconds will cause the

Score

Primary Speaker to drop connection with the

™

current device.

 When in Bluetooth

mode, if the Score

does not automatically pair with any recent devices, press

the PRESET button once. The Score

will then attempt to pair with the last paired device.

Bluetooth

PLAYBACK CONTROLS

 Once the Score

Primary Speaker has paired with a

™

Bluetooth

capable device, playback can be paused/

played using the PRESET button.

 Tracking forward and back can be activated by pressing

the TUNE/SEEK button.

USING A Score

PRIMARY SPEAKER IN SKAA

™

Make sure there's a SKAA

audio. Make sure your Score

the wrong audio, click the Bond button 6 times. If you still hear the wrong audio, click the Bond button 2 times (repeat if

necessary). Once you hear the right audio, hold the Bond button down for a few seconds until the Indicator (LED) turns Green.

USING SKAA

RECEIVERS

(APPLIES TO BOTH Score

Each SKAA

receiver has a Green List which remembers your favorite transmitters. A Green Indicator on your receiver

means you are listening to a favorite, or hunting for one. Your receiver can also explore to find new transmitters—an Amber

Indicator means you are exploring for transmitters which are not on your Green List. A Cluster is a product with two or more

pieces which behave as one, such as a left and right speaker pair. The Bond Button lets you select which transmitter you're

listening to. The Bond Button has the logo

OPERATION

capable device, select Ryobi

connection.

capable device asks for a pass-

capable device, holding the

Primary Speaker

™

Primary Speaker

™

transmitter (or another Primary which is in Bluetooth

Primary is in SKAA

™

SECONDARY AND Score

™

CONVERTING A P760 Score

SPEAKER INTO A SECONDARY SPEAKER

See Figures 4 and 6, page 14.

™

 SKAA

technology allows you to transform a second

Primary Speaker into a Secondary Speaker.

 Press the GEAR/POWER button to power on the Score

Primary Speaker.

 Press the GEAR/POWER button until SKAA

on the LCD screen.

™

 The Score

to con-

any SKAA

Speaker or any other SKAA