Remote Control Preparation; Remote Control Operation - Polaroid TVSAND32HDPR02 Mode D'emploi

REMOTE CONTROL PREPARATION

BATTERY INSTALLATION
Install the batteries as the following pictures. Be sure + and – terminals are positioned as
indicated in the battery compartment (Fig1).
SERVICE LIFE OF BATTERIES
- The batteries normally last for one year although this depends on how often the remote
control is used.
- If the remote control fails to work even when it is operated near the player, replace the
batteries.
- Use two size AAA dry batteries.
NOTE:

Do not drop, step on or otherwise impact the remote control. This may damage the
parts or lead to malfunction.

If the remote control is not going to be used for a long time, remove the batteries.

REMOTE CONTROL OPERATION

Point the remote control from no more than about 6m from the remote control sensor and
within about 60°of the front of the player (Fig2).
NOTES:
-
The operating distance may vary
according to the brightness of the room.
-
Do not point bright light at remote
control sensor.
-
Do not place objects between the
remote control and the remote control
sensor.
-
Do not use this remote control while
simultaneously operating the remote
control of any other equipments.
10