KLARBACH CM 30751 we Mode D'emploi page 30

EN
FAULT
Water runs out.
Maximum cooling
capacity is not
achieved.
Error messages on the display
Display codes
In the event of any error
codes,
Repair
• Have the mobile air conditioner repaired only authorised and certified specialist
personnel.
• Have a damaged mobile air conditioner mains power cable repaired only by an
authorised and qualified electrician to avoid possible risks.
Unauthorised and unqualified repairs and improper or incorrect
connection will void all warranty claims.
Page | 30
POSSIBLE CAUSES
Water drain hose has come
loose or is damaged.
Water drain hose is blocked.
Drain hole not properly closed.
The drain plug is damaged.
Ambient temperature is not
35°C and not 40% relative
humidity.
Meaning
contact After Sales Service:
www.ggv-service.de
MEASURES
Inspect the water drain hose for
damage and check for correct
installation; replace or install
correctly, as necessary.
Remove any obstacles and
straighten the water drain hose.
Check whether the drain hole is
properly closed.
The plug is damaged.
Close the drain hole properly or
replace the plug.
The appliance achieves the
maximum cooling capacity only with
the following parameters:
- Ambient temperature 35°C
- Indoor humidity 40%