Publicité
Les langues disponibles
Les langues disponibles
• Supports wirespeed and flow regulation
The Hama switch has an integrated non-blocking and
store-and-forward architecture which enables it to
provide maximum speed for your network. The switch
ensures reliable data transfers thanks to the integrated
ow regulation for full duplex and half duplex mode.
• Supports auto-MDI/MDIX and auto-sensing
The Hama switch supports PNP (plug and play) and
features the auto-MDI/MDIX function. You can connect
the Hama switch to computers or other network-capable
terminal devices without complex con gurations; it
doesn't even matter which network cable you use. You
can either use a Cat5e patch cable (1-to-1) or a crossover
network cable. The switch will automatically choose
the right setting for the type of cable used without you
having to con gure it.
• Power-saving mode
The Hama switch features advanced energy-saving
technology. This technology helps reduce the device's
power consumption if no data is being transferred or if a
connection is not being used.
7. Installation
Warning
• Only operate the product from an approved socket
that is connected to the public power supply. The
socket must be installed close to the product and
must be easily accessible.
• Disconnect the product from the power supply using
the On/Off switch – if this is not available, unplug
the power cord from the socket.
• If using a multi-socket power strip, make sure
that the total power consumption of all connected
devices does not exceed the power strip's maximum
throughput rating.
• If you will not be using the product for a prolonged
period, disconnect it from mains power.
Using the example of a typical con guration (Pic.1):
• Connect the switch to your DSL router/modem.
• Connect your computers/notebooks to the switch.
• Connect the power cable of the switch to a properly
installed and easily accessible mains socket.
Note
• Of course, you can also connect other network-
capable terminal devices such as printers, IP
cameras or external network hard drives.
8. Specifications
Standards
Protocol
5 or 8 10/100 Mbps, autonegotiation,
Connections
Special features
Memory buffer
Data rate (max.)
Transfer method
Permitted
humidity
Operating
temperature
Dimensions
Specifications in accordance with
Regulation (EU) 2019/1782
Manufacturer's name or
trade mark, commercial
registration number and
address
Model identi er
Input voltage
Input AC frequency
Output voltage /
Output current /
Output power
Average active e ciency
IEEE 802.3, IEEE 802.3u,
IEEE 802.3x, IEE802.3az
CSMA/CD
auto-MDI/MDIX
Half and full duplex
MAC address learning
Auto-sensing
448 kilobytes
10/100 Mbps at half duplex
20/200 Mbps at full duplex
Store and forward
90% (non-condensing)
0 to 40 degrees Celsius
12,4 x 7,2 x 2,4 cm
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
DYS605-050120W-3
100 – 240 V
50 / 60 Hz
5.0 V DC / 1.2 A / 6.0 W
77.0 %
3
Publicité
