Factory Configuration; Reset Factory Configuration; Reset Hardware - Bticino 342630 Notice De Montage

item 342630
INTRODUCTION
FACTORY CONFIGURATION
Secret code
Language
Address book format
Distribution board
Direct call
Door code
Contrast
Recall
RESET FACTORY CONFIGURATION
To reset the Factory configuration:
����������������
1234
Italian
Alphanumeric without message
4000 Disabled
0000 and 0001 Disabled
1234, 1235, 1236, 1237 and 1238
50
Disabled
• Switch off the power supply to the device
• Put a jumper on the two lower interface pins
• Switch the device back on. The following mes-
sage appears on the display:

- RESET HARDWARE -

• Switch off the power supply to the device
• Remove the jumper
• Switch the device back on.
The Factory configuration is reset
66