Using The Unit - Clatronic HL 2359 N Mode D'emploi

4....-05-HL 2359 N
1. Completely unwind the connecting cable.
2. Make sure that the machine is switched off (operating switch on "OFF").
3. Before inserting the mains lead into the socket, check whether the voltage you
intend to use complies with that of the machine.
For details see the machine label.
4. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
5. Set the desired function / temperature:
= Warm air 1
= Hot air 2
= Cold air 3
= OFF
6. You can set the room temperature with the temperature control.
Frost protection: holds the room temperature above freezing.
Cold air operation: Turn the temperature control to max. (high temperature), if
you wish to use the unit as a fan.
7. The indicator light lights up when the unit is in operation.
8. After use, pull the plug out of the socket.
1. Before cleaning the machine you should always remove the mains lead and
wait until the machine has cooled down. The machine should only be cleaned
with a slightly damp cloth.
2. Do not use any strong detergents or solvents for cleaning.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
The device supplied by our Company is covered by a 24 month guarantee starting
on the date of purchase (receipt).
During the life of the guarantee any fault of the device or its accessories *) ascriba-
ble to material or manufacturing defects will be eliminated free of charge by repai-
ring or, at our discretion, by replacing it. The guarantee services do not entail an
extension of the life of the guarantee nor do they give rise to any right to a new
guarantee!
29.05.2002 8:32 Uhr

Using the unit

frost protection
high temperature
for use as a ventilator
Cleaning
Guarantee
Seite 21
21
GB