YBA Genesis A6 Manuel D'utilisation page 5

Using your YBA Remote Control
Note: PRESS means a short press on a key while HOLD means to keep the key pressed for more than 3 seconds.
Always point the remote towards the IR window of your A6.
0
1
CAUTION Before connecting any input or output.....
Always make sure your A6 is in the OFF position. If you have any doubt, unplug the AC power cable from the wall.
Make sure any components connected to your Power Amplifier are off.
Neatly arrange and organize wiring to and from your A6 and to and from all your components. Separate AC wires
from audio cables to prevent hum or other unwanted noise from being introduced into the system.
0
Select the device you want to control between AMP, CD and AUX. To
control the A6, you need to select AMP button.
Note: AMP will remain the active function until you select another
device.
1
VIEW: Hold (>3 seconds) twice in succession to switch off the
background light. Hold again once to switch on background light.
www.ybahifi.com
Genesis A6 Power Amplifier
Page 5