Lindy 42341 Manuel Utilisateur page 4

User Manual
Operation
There are three methods to toggle between the computers. After switching please allow the computer a
few seconds to load all USB drivers before you can use the system.
1. Switch Button
The Switch Button is a wired remote control. Press the button to toggle between the two computers.
2. KVM Switching Software (Windows & Mac OS)
For KVM Switching Software please refer to installation section.
Right clicking the icon opens the port switching menu.
Double clicking the icon opens the configuration menu. Using this menu you may bind the audio ports
to one computer and you may enable the beeper.
Windows OS
Switching Menu
3. Keyboard Hotkey Switching (Windows & Mac OS)
Each keystroke hotkey sequence must be pressed within two seconds. It is not possible to switch to a
port with no active computer attached.
For Windows, the following key sequence for switching is preset: "Scroll Lock + Scroll Lock".
Additional hotkeys like "CTRL ALT + *" can be configured via the Configuration menu as described
above.
For Mac, please define the hotkeys via the Configuration menu as described above.
Configuration Menu
Mac OS
Switching Menu Configuration Menu
English