Operation; Preparation; Checking Connection; Setting Of Each Knob - Denon PMA-1500AE Mode D'emploi

ENGLISH

Operation

POWER
PHONES
FUNCTION
VOLUME

Preparation

2 Checking connections
• Make sure that all the connections are proper by
referring to the rear panel.
• C h e c k t h e p o l a r i t y ( p o s i t i v e a n d n e g a t i v e ) o f
connections, and the directivity of stereo separation
(right cord to right channel terminal, and left cord to left
channel terminal).
• Check the directivity of pin cord connection.

2 Setting of each knob

• Turn the VOLUME control knob counterclockwise, to
minimum position.
• Set the BASS, TREBLE and BALANCE control knob, to center
position.
• Set the SOURCE DIRECT and P. DIRECT switches to "OFF (
After checking the above items, turn on the power, the amplifier
is set in the ready mode in a few seconds.
SOURCE DIRECT
BALANCE
BASS TREBLE
PHONO TAPE-1 / CD-R TAPE-2 / MD
CD TUNER DVD / AUX
MUTING
TUNER DISC
PRESET SKIP
£
P. DIRECT
VOLUME

Playing the input source

1
Select the input source to be played.
(Main unit)
When "PHONO" is selected, pr ess the CARTRIDGE
switch on the rear panel of the main unit to select "MC
( )" or "MM (
¢
2
Start playback on the selected component.
For operating instructions, refer to the component's
manual.
3
Turn the
BALANCE
control knob to yield an appropriate
volume and sound quality.
NOTE:
If P. DIRECT button is set to ON position,the P. DIRECT
terminals are selected, and the input indicator is dimmed
out.
)".
9
ENGLISH
INPUT SELECTOR
REC OUT SELECTOR
PHONO TAPE-1 / CD-R TAPE-2 / MD
CD TUNER DVD / AUX
(Remote control unit)
)".
£
VOLUME BASS TREBLE
, , and