Placement Of Q-Tee Insert; Material Selection - attika RAIS Q-Tee 57 Manuel D'utilisateur

English

Placement of Q-Tee INSERT

Convection
RAIS stoves are convection stoves. Convection means that there is a circulation of air,
which ensures that the heat is distributed more evenly throughout the entire room. The
cold air is sucked in at the base of the stove up through the convection channel, which
runs along the stove's combustion chamber. The
stove, which ensures a circulation of warm air throughout the room.
Ventilation - use the insert optimally
Consider the placement of convection and outlet holes. Ensure that the area require-
ments are respected and that the holes are not blocked from the outside. There may
be discoloration of the wall above the stove doors, and above the convection outlet
holes. This is due to the ascending hot air. RAIS accepts no liability for installation or
consequential damages.
RAIS - Manual for RAIS Q-Tee
heated air pours out at the top of the

Material selection

Choose materials for panels/bricks with
a thermal resistance greater than 0.03
m xK/W.
2
Thermal resistance is defined as the
thickness (in m) divided by the wall's
lambda value.
Consult with your installer/chimney
sweep.
23