Locking The Controls; Resetting The Adjustments - Sony CPD-L181A Mode D'emploi

Customizing Your Monitor

Locking the Controls

The control lock function disables all of the controls except
the u (power) switch, MENU and some other buttons on
the front panel.
Once you select "LOCK," you can select only the following
items in the MENU OSD:
• EXIT
• CONTROL LOCK and FACTORY PRESET in the
OPTION OSD
If you press any locked button, the
the screen.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
MENU
3
Press the ˘/≥ buttons to select
LOCK).
4
Press the – button to select LOCK.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
16
mark appears on
MENU OK MENU
EXIT
PHASE
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
: 5SEC
: UNLOCK
OSD H POSITION
(CONTROL
OPTION
UNLOCK
LOCK
CONTROL LOCK
To cancel the control lock
Press the + button in step 4 to select UNLOCK.

Resetting the Adjustments

You can reset all of the adjustments and settings to the
factory settings.
The color temperature is reset to 9300K, the zoom setting is
reset to FULL 1 mode, and the power saving delay time is
reset to 5 seconds. The control lock is cancelled. All other
adjustments return to the default settings. The on-screen
language, however, does not change.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ˘/≥ buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
MENU
3
Press the ˘/≥ buttons to select ? (FACTORY
PRESET).
4
Press the + button.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
MENU OK MENU
EXIT
PHASE
PITCH
CENTER
ZOOM/SMOOTHING
COLOR
LANGUAGE
OPTION
: 5SEC
: UNLOCK
OSD H POSITION
OPTION
: 5SEC
ON
FACTORY PRESET