During Operation - ergoCentric upCentric Guide De L'utilisateur

1. If the power cord is damaged it must be replaced.
2. Do not open any electrical components
(control box, motor housing, handset).
3. Never drop or insert any object into any opening.
4. Make sure the correct tools and assembly parts are
used when assembling the system.
5. Before transporting the table, always remove the
power cord from main power supply.

During Operation

1. Not intended for use by children.
2. For indoor use only.
3. Do not use table when the load exceeds 420 lbs. (190kg)
4. Always unplug the table from the electrical outlet before cleaning.
5. Unplug from outlet before installing or removing parts.
6. Keep the cord away from heated surfaces.
7. Do not operate where aerosol (spray) products are
being used or where oxygen is being administered.
8. To disconnect, lower table to minimum height,
then remove plug from outlet.
9. If table is heavily loaded, keep load away from edges
to prevent the possibility of the table tipping over.
10. Any servicing is to be performed by an authorized service
representative. Contact service@ergocentric or 1 866 438 3746
for more information.
11. Make sure that no persons or items will collide with the table when
adjusting upwards and downwards.
12. If the control box or the legs make any unusual noises or smells,
immediately unplug table from power supply.
5