Westfalia 300 072 300 107 Instructions De Montage page 28

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
GB
Installing and Connecting the Control Unit
Depending on the type of vehicle, attach the control unit behind the left side covering or on the
left of the tail plate using the supplied mushroom band. The control unit may be installed irre-
spective of the position.
Attach the brown 1.5 and brown/white 2.5 earth wires to a suitable earthing position in the tail
area.
Place the red 1.5 continuous positive wire up to the battery, ensuring that the wire cannot be
damaged by vehicle parts. If necessary, provide the wire with additional protection. Lock the end
of the continuous positive wire into place on the supplied fuse holder, locking the supplied con-
tinuous positive connection piece into place in the second chamber of the fuse holder, and se-
cure the fuse holder locked contacts with the supplied fuse clip. Connect the continuous positive
connection piece's ring eyelet to the battery's positive terminal. Ensure that the fuse holder has
been correctly attached.
Connection to the Vehicle's Wires
When connecting the turn signal wires, the respective turn signal wire has to be separated at the
taillight and the wire ends have to be connected with cutter connectors as outlined in the wiring
plan. Please ensure that installation is carried out by a qualified person and that the cutter con-
nector has a flawless contact with the respective wires.
yellow or red/green
Turn signal switch
Separate the wire to the rear fog light near the taillight or at a suitable position, and connect the
wire from the rear fog light switch with the blue lead and the wire to the rear fog light with the gray
lead of the wire lane using cutter connectors. For vehicles with two rear fog lights, the second
rear fog light's wire is also to be separated and a connection between the gray wire and the
second rear fog light is to be made.
The vehicle's own rear fog light is switched off by the control unit.
rear fog light switch
separate
left rear fog light
28
Control unit
Separate wire
blue
disabling
contact
Control unit
gray
connection to the
second rear fog
light
green/white or gray/yellow
right rear fog light
Turn signal lamp
rear fog light switch
separate

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

300 072 300 113300 073 300 113

Table des Matières