Speaker Connections; General Care - JBL BANDPASS CSX-1400BP Mode D'emploi

BANDPASS CSX-1400BP

SPEAKER CONNECTIONS

Connect the + and – terminals on the enclosure to the amplifier's outputs, observing proper polarity. Use at least 0.5mm
(20 AWG) speaker wire for the connections to the enclosure.
BATTERY
SPECIFICATIONS
CSX-1400BP
Speaker type: 12" Bandpass Enclosure
Woofer: 12" (300mm)
Power handling, RMS: 350W
Power handling, peak: 1400W
Sensitivity (2.83V/1m): 93dB
Frequency response: 45 – 130Hz
Impedance: 4 ohms
Dimensions 18-3/4" x 16-1/4" x 15-3/8"
(L x D x H):
475mm x 412mm x 390mm

GENERAL CARE

The loudspeaker may be cleaned with a damp cloth. Do not use any cleaners or solvents.
A valid serial number is required for warranty coverage. This product is designed for mobile applications and is not intended for
connection to the mains.
HARMAN International Industries, Inc.
8500 Balboa Boulevard, Northridge,
CA 91329 USA
www.jbl.com
HEAD UNIT
Remote
L R
Turn-On
Speaker Out
AMP
© 2015 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated registered in the United States
and/or other countries. Features, specifications and appearance are subject to change without notice.
2
White
12V DC
Black