Installation Of The Outdoor Unit - König Electronic SEC-PH360 Mode D'emploi

Installation of the outdoor unit:

1. Drill holes in the wall or other material A1/A2 to mount the outdoor unit and pass the cable through.
2. Connect connector B1 to B2 (for electronic lock 12 V, 1 A if installed)
3. Connect connector C1 to C2
4. Tighten the screws D1 and D2
Note: the connectors B1/B2 and C1/C2 need to be behind the wall or other material and not between
the outdoor unit and wall or other material.
3