Getting Started - ASTi Sound+Sleep SE Mode D'emploi

SOUND
OF SLEEP
TO OUR CUSTOMERS,
Thank you and congratulations on your purchase of a Sound+Sleep SE from Adaptive Sound
Technologies. It is, quite simply, the best sleep sound machine on the market. It features natural
sounds recorded by our own team of audio professionals. These sounds are used to create multi-
layered sound environments, which are non-repeating and unique each time. With 64 dynamic
sound environments in 16 categories, you are certain to fi nd the perfect environment for rest,
relaxation, or better sleep.
If you have any suggestions on how we can make our products better please let us know.
Sam J. Nicolino Jr., President and CEO, ASTI
WRITE DOWN YOUR SERIAL NUMBER AND REGISTER YOUR PRODUCT
Record your serial number here. You can fi nd it on the bottom of the product.
You'll need it when registering your product at astisupport.com, and you
should have it handy should you need to contact our support team.
Serial Number: __________________________________________________________________________
Date of Purchase: ________________________________________________________________________

GETTING STARTED

Inside the package you'll fi nd:
1. This Owner's Manual
2. Sound Environments Guide
3. Sound+Sleep SE
4. AC Power Adapter and Cable
5. 3.5mm Audio Cable
Connect to an AC Outlet
The power jack is located on the bottom of the SE.
1. Push the power adapter plug at the end of the cable
into the jack.
2. Slip the cord under the rubber foot by separating
the two pieces of the foot along the slit.
3. The machine should sit fl at on a table or nightstand
if the cord is installed correctly. The slit should easily
separate by running your fi nger down it. If not, you
can use a knife to cleanly open the slit.
Next, connect the AC plug into an un-switched wall
outlet. The fi rst time you plug it in, it may take up to
30 seconds to perform a self-test. Please note that the
MODEL NUMBER: ASM1005
sixteen painted dots around the dial do not light up.
We recommend that you do not use an outlet connected
to a switch. Your SE automatically remembers its
X XXXXX XXXXX settings each time it's turned off using the POWER
button, but it may not remember its settings if it
loses power.
You may use the SE internationally with any AC line
voltage from 100–240 Volts, at 50 or 60Hz, using
an AC plug adapter (available at many electronics
and travel stores).
1.
2.
3.
2