heysong B18H Manuel D'utilisation page 3

In order to pair your Bluetooth audio device to your Bluetooth Speaker for the first time, follow the steps below:
1). Make sure your Bluetooth audio source is held within three meters of your speaker.
2). Press and hold the" "switch on your speaker to power on
The LED light will blink blue to indicate that you have entered pairing status.
3). Go to the Bluetooth Manager of your Bluetooth audio source. Please refer to the User's Manual of your Bluetooth
audio source for more information.
4). Search Bluetooth devices and select"B18H".
5). Once paired, the blue LED light will be solid and you can use your speaker to listen to audio from you Bluetooth
sound source.
NOTE：Press the" "twice to disconnect the Bluetooth
Using The Hands-Free Function
When an iPhone or other smartphone is connected to your speaker follow the steps below to take calls hands-free.
1. Press" "o pick up the call.
2. Press and hold" "to reject the call.
3. During call: Press" "again to hang up the call.
TWS Function
If you have two of B18H, you can use multiple point to achieve wireless stereo combined playing music.
1. Make sure two B18H are without any Bluetooth connection.
2. Power on both units and press "
indicated tone. When blue LED blink quickly on the one unit and solid on the other one,it means the multiple point
connection is successful.
3. Under connection, search Bluetooth device and select"B18H"
4. When the device and the units are connected, the blue LED of both units will be solid.
5. Press the" "button twice to disconnect the TWS connection from the units.
6. Press the" " button twice again to disconnect the device from the unit.
Troubleshooting
Problem
The speaker doesn't connect to
device
A tone is heard every few seconds
Bluetooth connection distance
cannot reach to 33ft.
The speaker will not power on
The speaker doesn't control
track(s)/volume
The speaker distorts at high volume
" button on the speaker, the two speakers will connect automatically with
Solution
Speaker needs to be connected/re-paired to device
Speaker needs to be charged
Avoid operating the Bluetooth speaker in areas of
strong electromagnetic Interference,such as near
induction cookers,large power fans,motors etc. Move
the speaker closer to Bluetooth device.Fully charge
the speaker and try again.
Speaker needs to be charged
Speaker needs to be in Bluetooth mode for full
control
The devices' volume needs to be lowered