Belkin GoStudio F8Z295 Guide D'utilisation page 25

SPeCIfICaTIonS
seCTions
Table of Contents
on-board Microphones
• Microphone Type: Electret condenser microphone (ECM),
unidirectional, approximately 50 dB sensitivity
• Gain Settings: off: +6 dB; low: +24 dB; high: +36 dB; auto: +35 dB
to 0 dB
Headphone/line output
• Nominal Headphone Impedance: 32Ω
• Monitor level control may need to be increased when using 600Ω
headphones.
• Output Power: 40mW per channel
• Maximum Output Voltage: 900mVrms
GoStudio
1 2 3 4
aC Power Supply Requirements
• Voltage: +5VDC ± 5%
• Current: 1A recommended. 1A to 3A power supplies are acceptable.
• Power: 5W recommended. 5W to 15W power supplies are
acceptable.
DC Plug Polarity: Ring is negative, tip is positive .
23
5 6