Specifications - Belkin GoStudio F8Z295 Guide D'utilisation

SPeCIfICaTIonS

seCTions
Table of Contents
Typical Performance
• Total Harmonic Distortion (THD): < 0.05%
• Signal to Noise Ratio (SNR): > 75 dB
• GoStudio Battery Life: > 4 hours recording time, when using new,
standard alkaline AAA batteries. Heavy use of the speaker for
playback may degrade battery performance.
Combo Jack XlR Inputs
• Input Type: Dynamic microphone (balanced or unbalanced)
• Maximum Input Signal (Gain switch set to off): 275mVrms
• Input Impedance: 2kΩ
• Gain Settings: off: +10 dB; low: +36 dB; high: +50 dB; auto: +45 dB
to +10 dB
GoStudio
1 2 3 4
Combo Jack ¼" Inputs
• Input Types: Dynamic microphone (balanced or unbalanced), line-
level source (balanced or unbalanced)
• Maximum Input Signal (Gain switch set to off): 1Vrms
• Input Impedance: 10kΩ
• Gain Settings: off: 0 dB; low: +26 dB; high: +40 dB; auto: +35 dB to
0 dB
3 .5mm Inputs
• Input Types: Electret condenser microphone (stereo or mono,
unbalanced), line-level source (stereo or mono, unbalanced)
• Maximum Input Signal (Gain switch set to off): 1Vrms
• Input Impedance: 90kΩ
• Plug-In Power for Microphones: +2VDC
• Gain Settings: off: 0 dB; low: +24 dB; high: +36 dB; auto: +35 dB to
0 dB
22
5 6