Haier HCR2250AGS Instructions D'installation page 29

7. Remove the natural gas bake orifice and replace with the 1.0 Diam. LP orifice. Reinstall
burner.
8. To adjust oven burner: The flame can be adjusted using the adjustment screw behind the
oven control knob.
If the low flame needs to be adjusted: Light bake burner and turn the oven control knob to the
lowest setting. Wait 5 minutes then remove knob. Insert a small, flat-blade screwdriver into
the adjustment screw, and slowly turn the screw until the flame appearance is correct.
• Open the valve more if the flames are too small or fluttered.
• Close the valve more if the flames are too large.
Replace Knob.
30