Operations; Rs 232C Functions - ERNITEC Lunavision Série Manuel D'utilisation

FR │Série de cameras Lunavision ─ Versión. 1.0
6.2 Connecteur Zoom/Foyer/Sortie alimentation ext./Sortie fonction ext./Sortie diaphragme (J3)
8 7 6 5 4 3 2 1
15 14 13 12 11 10 9
Sur
Broche
221 & 231
1 Zoom +
2 Zoom -
3 Focale +
4 Focale -
5 Sortie 12 V
Raccordement direct
6 Damp. - (accélère l'ouverture/la fermeture du diaphragme)
7 Damp. + (ralentit l'ouverture/la fermeture du diaphragme)
8 Drive+ (Moteur+)
9 Drive- (Moteur-)
10 Terre
11 Terre
12 Terre
13 Bouton « Up » (Haut) externe
14 Bouton « Function » (Fonction) externe
15 Bouton « Down » (Bas) externe
48/60
Sur
321 & 331
1
Couleurs/N-B
EN │Lunavision Camera Series ─ version. 1.0
7.1.2

Operations

Functions buttons for on-screen-menu
Up Buttom Function Buttom Down Buttom
75 mm
J1
MENU
56 mm J2
J3
MADE IN DENMARK
Fig. 2 : Rear Panel of Camera
a. To start adjustment, push the "FUNC" button. The menu will appear on the
monitor. (See page 12)
b. Use "UP" or "DOWN" buttons to choose functions. To select function, press
the "FUNC" button.
c. After selecting the function, press "UP" or "DOWN" buttons to choose mode.
To select mode, press the "FUNC" button.
d. Go to the next function if needed, and repeat (b) to (c).
7.2

RS 232C functions

White balance :
Electronic shutter :
Auto gain control :
Back light compensation :
Iris level :
Gamma :
Scanning reversal :
Frame integration :
13/60
Screen display (example)
[xxxxx] [xxxx]
[xxx] [xxx]
Fig. 1: Scroll Bar
Note : This scroll bar will be displayed when the
following functions are selected.
White balance = manual,
AGC = manual,
IRis= video level Direct Drive
To adjust the color temperature
To adjust the shutter speed
OFF, +12dB, +24dB, manual selectable
To create your own BLC pattern
To adjust the video level (direct drive)
0.45, 0.60, 1.0 selectable
To select the scanning direction
To select the sensitivity