DS Produkte P01 Mode D'emploi page 9

9
2. Attach the connecting end to the hair dryer.
3. To adjust the direction of rotation, turn the shutter so that it
is diagonal and not parallel (!) to the tube.
4. Connect the hair dryer to an easily accessible socket.
8. Insert the strand in the cylinder and switch the hair dryer
on.
9. The air fl ow will wind the strands around the curling insert
and dry it. Move the hair dryer attachment up and down
once or twice. This will ensure that the strand of hair prop-
erly wraps around the curling insert.
10. Wait a few seconds before you pull the hair dryer attach-
ment off of the strand. The length of time needed for blow
drying your hair depends on the texture of your hair and
the thickness of the strands.
11. Take another strand and repeat steps 6 to 10. Continue
until you have curled all your hair.
12. Once you are done styling, disconnect the hair dryer from
the power supply, let the product cool down and pull the
attachment off of the hair dryer.
13. Before you stow the hair dryer attachment, wipe it off with
a soft cloth if necessary to remove any residue (e.g. from
hair care products).
5. Part the top layer of hair and
start with the hair strands at the
bottom.
6. Pick out a strand of hair and
comb it thoroughly.
7. Apply a suitable setting product.
EN