Cleaning And Storage; Troubleshooting; Disposal - DS Produkte P01 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

Cleaning and storage

ATTENTION!
Danger of electrocution! Always remove the product from the hair dryer before
cleaning.
Do not use any abrasive or scouring cleaners or cleaning pads to clean the product.
They could damage the surface.
We recommend cleaning the product regularly to remove any residue (e.g. from hair care
products).
Wipe the product off with a damp cloth and dry it off with a soft cloth. If heavily soiled,
you can use a small amount of detergent to clean it.
Store the product in a dry, frost-free location not exposed to sunshine that is out of the
reach of children and animals.

Troubleshooting

If the product is not working properly, please check whether you are able to rectify the
problem yourself.
Problem
Your hair is not
winding around the
curling insert.
Odour develop-
ment

Disposal

The packaging material is recyclable. Dispose of the packaging in an environ-
mentally-friendly manner and make it available to the collection service for re-
cyclable materials.
10
Possible cause/solution
Is the shutter for setting the direction of rotation parallel to
the attachment tube? It must be diagonal in order for the air
to circulate.
The fi rst time you use the device: An odour often develops
when using new products for the fi rst time. The odour should
disappear once you have used the product a few times.
The product has already been used: Is there any dirt or resi-
due on the product? Clean it as described in chapter "Clean-
ing and storage".
Customer service / importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls subject to a charge. The cost var-
ies depending on the service provider.)
All rights reserved.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z 02108

Table des Matières