Switching Between Multi Mode And Solo Mode; Pairing With Bluetooth - THOMSON WS07VCA Mode D'emploi

Then select the preset icon in the top right of the screen.
Then select any preset position to save your selection. You can then directly launch your favourites
from this page.

Switching between Multi Mode and Solo Mode

If you have added an additional Thomson Smart Audio speaker to your network, you can either play
different music on each speaker or sync them to play the same track by grouping them.
To group your speakers, simply press and hold one named speaker on your device list and then drag
it onto the 2nd speaker in the list. They will then be synced and will play the same track.
If you wish to separate them into Left and Right channels, press the LR button to make one speaker
left and 1 speaker right for a true stereo effect.

Pairing with Bluetooth

Press the M button to change from Wi-Fi mode to Bluetooth mode.
The light ring will change to flashing Blue and the speaker will tell you that you are in Bluetooth mode.
Go to the Bluetooth settings on your device and search for Thomson WS07 in the Bluetooth list.
When Bluetooth is connected the speaker will tell you and the Blue light will stop flashing. It will remain
solid blue when in Bluetooth mode. You can then play music from your device, but you must be with
10 metres or connection will be lost.
Your speaker will automatically connect in future if you set it to Bluetooth mode.
Note that Alexa voice control mode will not work in Bluetooth mode.
- EN 10 -