Camera Modes; Recording Video; Taking A Picture - Velleman CAMCOLVC20 Mode D'emploi

First use
Press the on/off button on the side of the camera to turn it on.
•
The blue indicator will light up.
By default, the camera starts in video mode. For details about modes,
see section Camera modes below.
To turn the camera off, press and hold the on/off button.
•
Setting the time
1. Press the Menu button
2. Use the down arrow to go to Set Date/Time and press the button OK.
3. Use the up and down buttons to set the date and time and press OK.
You need to press the button OK to confirm each setting.
4. You can also set the date format (for example YY/MM/DD or
DD/MM/YY).
5. Press the button OK to confirm.
6. Press the Menu button
7. Operation

7.1 Camera modes

The camera has 3 modes: video, picture and playback.
To switch between modes, press the button M on the back of the camera.

7.2 Recording video

1. With the camera on, press the button M to set it to video mode
(a video icon appears in the top left corner of the display).
2. You can zoom in or out with the up and down buttons.
3. To start recording, press the button OK.
4. To stop recording, press the button OK again.
The camera saves the video.
o
To view a video, see section Viewing video or pictures below.
o
Note Locking a video
You can lock a video to prevent it from being deleted.
•
To do so, while the camera is recording, press the button Lock video
•
For details, see section Locking video below.
•

7.3 Taking a picture

1. With the camera on, press the button M to set it to picture mode
(a camera icon appears in the top left corner of the display).
2. You can zoom in or out with the up and down buttons.
3. To take a picture, press the button OK.
V. 01 – 09/10/2014
CAMCOLVC20
twice.
to quit the menu.
5
.
©Velleman nv