Set-Up And Operation - Dutchblue 7509 Mode D'emploi

Set-up and operation

Designed to assist with toilet transfers, this
adjustable toilet seat raiser attaches to existing
toilet seat mounting points. Can be used with
or without armrests (one or both). Seat height
can be adjusted to 50 mm, 100 mm or 150 mm.
Prior to use please read all instructions. Unit
must be properly mounted to an existing toilet
bowl before use.
Installation
Remove your existing toilet seat from the
1.
bowl. Seats are generally attached by a pair of
bolts/ nuts located under the rear rim of
the toilet.
2. Unscrew and remove the long plastic nuts
from the rear of the toilet seat raiser.
3. Position the unit onto your toilet bowl,
inserting the rear mounting bolts through the
existing holes on your toilet. Ensure the unit is
centred over the toilet bowl.
The position of the mounting bolts can be
4.
adjusted to match different toilets. To adjust,
slide the mounting bolts along the rear bar to
achieve the correct distance.
5. Mounting nuts must be loose for mounting
bolts to slide freely along the bar. Reattach
both long plastic nuts to the mounting bolts
and tighten fi rmly. Check the toilet seat raiser
is firmly clamped against the toilet bowl
before use.
4
ENGLISH
dutchblue.com dutchblue.com
Rear bar
Nut
Bolt