Bestron AVC850A Mode D'emploi page 25

instruction manual
cleAninG And mAintenAnce - cleaning the housing
1. Do not clean the vacuum cleaner during charging. Remove the adapter from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
cleAninG And mAintenAnce - cleaning the turbo nozzle
1. Remove the turbo nozzle from the
vacuum cleaner. Push the button
(1) at the top of the tube connection
and pull the turbo nozzle out.
2. Unlock the locking plate at the
bottom of the turbo nozzle housing
by sliding the slider inwards (see
figure 6A).
3. Remove the locking plate and the
rotating brush from the turbo nozzle
housing (figure 6B) and clean the
rotating brush.
4. Place the rotating brush back into
the turbo nozzle housing.
5. Mount the locking plate and lock it
by sliding the slider outwards.
cleAninG And mAintenAnce - cleaning or replacing the filter
For best results clean or replace the filter after every second or third use of the vacuum cleaner, or more
frequently if the filter is visibly blocked.
Clean the filter regularly to avoid that the filter becomes clogged and the engine overheated.
1. Do not clean or replace the filter
during charging. Remove the adap-
ter from the wall socket.
2. Remove the tube from the vacuum
cleaner.
3. Remove the waste from the dust
container (see "Removing waste
from the dust container").
4. Remove the dust container from
the vacuum cleaner by pressing the
release button (see figure 7A) and
taking out the dust container (figure
7B).
5. Turn the upper lid and remove it
from the dust container (figure 7C).
6. Take the dust separation system
and filter from the dust separation system (figure 7D).
7. Rinse the filter and the dust separation system thoroughly in lukewarm water.
8. Allow the filter to dry thoroughly.
9. Mount the holders and filters in the reverse sequence.
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
• Do not clean the filter in a washing machine.
• Do not dry the filter with a hairdryer.
B
E
D
C
25
A
6
A
B
7