Basic Operations - Farouk CHI BIOSILK ONYX EUROSHINE Instructions D'installation

SAVE THESE INSTRUCTIONS
This appliance is for: 220-240V AC, 50/60Hz, 1800W

BASIC OPERATIONS

1. Plug the hair dryer into the correct power supply.
2. Press the ON/OFF button to turn on the dryer.
3. Press the +/- button to select the airflow and heat desired on the digital
screen display.
3 temperature settings: Low/ Medium/High
- Low airflow and Low temperature for gentle drying
- High airflow and High temperature for very quick drying
4. To lock and unlock all the buttons, press and hold down the lock button.
5. Press Cold Shot Button if desired.
6. After use, press the ON/OFF button to turn off the dryer, before unplugging from
the power supply.
7. Do not pull the cord, grasp the plug to unplug the appliance.
MAINTENANCE
Your appliance is virtually maintenance free. No lubrication is needed. Keep
heated surfaces clean and free of dust, dirt, and hair spray. If cleaning becomes
necessary, disconnect the appliance from the power source and wipe the
exterior with a damp cloth. If the cord becomes twisted, untwist prior to use.
Electrical converters CANNOT be used.
If any malfunction occurs, do not attempt to repair the tool yourself.
Call the Customer Service. (See "LIMITED WARRANTY" Section).
4
OPERATION INSTRUCTIONS