Grinding The Blades; Storing And Transporting - ADE KA 1806 Mode D'emploi

4. Pull out the grinder, turn it by 180° and re-insert, as shown in Fig. 14.
5. Tighten the knurled nut on the back. In this position, you can proceed with
grinding.

Grinding the blades

1. Plug the power cord into the mains outlet.
2. Turn on the machine.
Fig. 14
3. Press and hold down the back button (1) for a few seconds to sharpen the blade.
4. To deburr the blade, briefly press the front button (2) on the grinder.
5. Turn off the machine and unplug the power cord from the mains outlet.
6. Reassemble the grinder.
7. Clean the blade and the machine with a suitable cleaning agent.

Storing and transporting

Note the following points when storing or transporting the machine:
‚ You will need a hand to handle the machine. Grasp the machine by the four feet as
a reference point.
‚ Clean the machine and accessories before storing them.
‚ Keep the device out of reach of children in a dry, frost-free place. You can use the
original packaging as outer packaging.
KA 1806 electric food slicer
Druckbuch Elektr Alleschneider KA 1806 3 Sprachen A5.indb 47
1.
2.
Storing and transporting
21.02.2019 11:33:49
47