JAROLIFT TDRC01 Mode D'emploi page 21

4. Carefully slide the new battery (TYPE CR 2430) into the
battery holder from above.
6. Secure the rear cover with the screws previously removed.
Make sure that the rubberised button in the centre of the
cover is seated correctly�
ATTENTION!
Do not swallow battery!
Chemical burns!
Note!
For hand-held transmitters with timer function, the time as well as the up and down times must be reprogrammed. The codes
of the programmed radio motors and radio receivers remain stored.
5. Carefully press the front part of the handheld transmitter
into the rubber edge of the rear cover.
7. Dispose of the empty battery at a
collection point in your area.
BATTERY CHANGE
21