Publicité
Produkthinweise
MAGNA
Dear client, Dear installer,
You have chosen a product which meets the highest standards in quality and manufacturing., Please observe the following
instructions for its assembly and use so that you can enjoy your new shower for a long time to come
This shower enclosure is intended only for mounting on a shower tray or bath tub or on a specially equiped shower area and
guards against water splashing.
We are not liable for any other use of this product without prior written consent of the manufactuer.
Before installation examine the product carefully for possible damages which may have occurred during transport.
We are not liable for any defects after the shower enclosure is installed. Also the guarantee does not cover damages caused by
improper installation or carelessness.
It is very important to check the glass parts. Even slight damages can lead to sudden glass breakage. Warning do not damage
edges of glass sheets during mounting
or use of the product. Never install damaged sheets of glass !
The shower enclosure has to be attached to the wall as indicated in the installation instructions. Check stability of the wall
construction before mounting.
According to the wall construction, e.g. in case of light wall construction, you would need special plugs for attaching.
These plugs are not included in the delivery. Before you start to drill, please examine carefully if there is wiring for electric,
gas or water supply below. Drilling into the wiring can cause major defects and can also be life threatening.
Use the enclosed silicone for sealing the shower enclosure or if necessary a suitable one for your purposes. For natural stone or
marble you have to use a special kind of silicone ! Let the sealant dry for 24 hours before the first use of the shower.
For cleaning and care of the shower enclosure please follow the attached instructions.
This document must be provided to the end-user and kept in a safe place.
3
Publicité
