Replacing The Strimmer Spool; Cleaning The Appliance; Storing The Appliance - Medion MD 16905 Traduction De La Notice Originale

8. Replacing the strimmer spool

WARNING!
Risk of injury.
 Disconnect the appliance from the mains before
replacing the strimmer spool.
NOTICE!
If the ends of the nylon cord are not visible, the cord ends must be
passed through the spool housing to the outside or the strimmer spool
may need replacing.
 Press the lid lock (15) to remove the spool housing cover (16).
 Pull the strimmer spool out.
 Thread the two nylon cords into the openings on the spool housing (17).
 Place the strimmer spool into the spool housing and pull the nylon cords out
through the openings. Pull out the two ends of the nylon cords far enough to
protrude above the thread cutter in the protective cover.
 Replace the spool housing cover onto the housing so that it clicks audibly into
place.

9. Cleaning the appliance

WARNING!
Live components. There is a risk of electric shock.
 Never immerse the appliance in water or other
liquids. Do not spray the appliance with water.
 Always pull out the plug before cleaning the
appliance.
 Clean the appliance after every use, as dried grass residue is difficult to remove.
 Do not use aggressive cleaning agents as these could damage the surfaces of
the appliance.
 Keep the ventilation slots free of debris.
 Clean the appliance with a cloth or a soft brush.

10. Storing the appliance

 Clean the appliance thoroughly.
 Always store the appliance secured against switching on in a clean, dry location
and out of the reach of children or other unauthorised parties.
DE
FR
NL
EN
91 of 98