Jimmy F2 Mode D'emploi page 9

Please do not repair, disassemble or refit the hair dryer by yourself, otherwise you may be
injured due to fire or abnormal movement. Please contact the local customer service center if
repair is needed.
Note: This symbol on the body indicates that it is prohibited to use in the bath or shower.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved
Children shall not play with the appliance
Cleaning and user maintenance shall not be made by children without supervision
Trouble Shooting
Please check the following issues before sending to designated repair offices.
Trouble
The motor is
not working
The motor is
not working
The motor is
not working
Power off suddenly
Power off suddenly
Air flow is small
Attention:If any other failures occurred, which need professional tools, in order to avoid danger, the machine must be
repaired or replaced by manufacturer, other maintenance offices or professionals from similar offices.
Possible Causes
Not plug in tightly
No power on the socket
The switch buttons are not
pressed in place
Hair dryer temperature is too
high and activated overheating
protection.
The air inlet is blocked by
obstacles (such as fluff, hair, etc.),
and activated overheating
protection system .
The air inlet is blocked by
obstacles (such as fluff, hair, etc.)
Solutions
Check if the power cord
plug is tight.
Check power socket
Press the switch button in the
right place.
Switch off and unplug the power
cord, reuse it after it cool down for
a minutes.
Switch off and unplug the power
cord. Remove the foreign objects
in air inlet. Reuse it after it cool
down for a minutes.
Clean air inlet
7