Taking Out Of Service; Maintenance/Cleaning - Vega 10081428 Instructions D'emploi

Translation Operating instructions – Safe
Opening appliance
Activate administrator mode.
Ü
Enter operating code 00.
Ü
Confirm with the # key.
Ü
Door opens automatically.
7.3 Faults/Troubleshooting
Have any malfunctions of the appliance repaired exclusively by qualified person-
Ü
nel.
Resetting administrator code
If you forgot the administrator code, it is possible to reset the code to factory
setting.
Open the safe with the master key.
Ü
Remove the back cover of the door (with 3 screws).
Ü
Press and hold the RESET button on the operating panel for about 7 seconds.
Ü
The display shows RESET.
Release button.
Ü
Re-install back cover.
Ü
The administrator code is reset to factory settings.

7.4 Taking out of service

When the appliance is not being used:
Remove the batteries.
Ü
8

Maintenance/Cleaning

8.1 Maintenance
Have the appliance maintained exclusively by qualified personnel.
Ü
8.2 Cleaning
Dust off the appliance with a soft and clean cloth when required.
Ü
18