Olympia CN316 Mode D'emploi page 3

• OLYMPIA recommend that this appliance is PAT tested on an
annual basis to ensure the product remains safe.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your OLYMPIA product.
Pack Contents
The following is included:
• Olympia Carving Station Food Warmer
• Instruction Manual
OLYMPIA prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your OLYMPIA dealer immediately.
Operation
• Turn the appliance On/Off using the power switch on the stem of the appliance.
Note: The appliance only maintains temperature, it does NOT continue to cook
food.
Cleaning, Care & Maintenance
• A Olympia dealer or qualified technician should carry out repairs if required.
• Always switch off the appliance, disconnect the power supply and allow to cool before
cleaning or performing maintenance.
Troubleshooting
Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Lamp expired
CN316_ML_A5_v2_20181218.indb 3
Probable Cause
Check the unit is plugged in correctly and switched on
Call OLYMPIA agent or qualified Technician
Replace the fuse
Check power supply
Call OLYMPIA agent or qualified technician
Replace lamp, part number AE307 or AG570
UK
Solution
2018/12/18 11:44
3