Chapter -3: Using Your Freezer; Control Panel; Warnings About Temperature Adjustments - Sharp SJ-S2197E00X-EU Guide D'utilisation

Masquer les pouces Voir aussi pour SJ-S2197E00X-EU:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22

CHAPTER -3: USING YOUR FREEZER

Control panel

Freezer temperature
set button
Freezer partition temperature setting button
This button allows setting temperature of the freezer. In order to set values for freezer partition, press this button. Use
this button also to activate SF mode.
Alarm light
In case of a problem within the freezer, the alarm led will release red light
Super freezer mode
When would it be used?
• To freeze huge quantities of food.
• To freeze fast food.
• To freeze food quickly.
• To store seasonal food for a long time.
How to use?
• Press temperature set button until super freezing light comes on.
• Super freezing led will light during this mode.
• Maximum amount of fresh food (in kilograms) to be frozen within 24 hours is shown on the appliance label.
• For optimal appliance performance in maximum freezer capacity, set the appliance to active SF mode 24
hours before you put the fresh food into the freezer.
During this mode:
If you press temperature set button, the mode will be cancelled and the setting will be restored from -16.
Note: "Super Freezer" mode will be automatically cancelled after 24 hours or when freezer sensor temperature
drops beneath -32 °C.
Freezer temperature settings
• The initial temperature of the Setting Display is -18°C.
• Press freezer setting button once.
• Every time you press the button, the setting temperature will decrease. (-16°C, -18°C, -20°C,.. super freezing)
• If you press freezer setting button until super freezer symbol is displayed on Freezer
- Settings Display and you do not press any button within the following 3 seconds,
- Super Freezing will blink.
• If you keep on pressing, it will restart from last value.

Warnings about temperature adjustments

• Your temperature adjustments will not be deleted when an energy breakdown occurs.
• Do not pass to another adjustment before completing an adjustment
• Temperature adjustments should be made according to the frequency of door openings, the quantity of food
kept inside the freezer and ambient temperature of the place of your freezer.
• Your freezer should be operated up to 24 hours according to the ambient temperature without interruption after
being plugged in to be completely cooled.
• Do not open doors of your freezer frequently and do not place much food inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the compressor of your freezer, when you take the
plug off and then plug it on again to operate it or when an energy breakdown occurs. Your freezer will start to
Symbol of
Super Freezing Mode
alarm indicator led
Freezer adjusted
temperature indicator
EN -6-

Publicité

Table des Matières
loading

Table des Matières