ABS PETER ASCHAUER GMBH Mode D'emploi page 30

Step 7
Height adjustment of the activation handle
Check when wearing the backpack if the activation handle is
positioned in a way that works for you. Usually that is the case,
if not, the handle attachment can be adjusted to the appropriate
height. The proper position of the activation handle should be
between chest and shoulder.
26
In order to adjust the height open and undo the Velcro closure,
attach the handle plate to the appropriate plastic grommet and
fasten the Velcro closure.
Make sure that the activation handle is not obstructed by
clothing and that it can be easily reached.
A retail shop will be able to attach the activation handle on the
right hand strap if so desired by left-handed clients. A special
handle plate is therefore needed.
Step 8
Remove activation handle
In order to remove the handle, undo the Velcro closure and push
the coupler upwards. The activation handle will pop out without
Step 9
Practice activation
We want you to feel 100% comfortable with the ABS-System.
We therefore strongly recommend that you practice the triggering
as part of your training so that the functional principle can be
demonstrated as realistically as possible.
Please ensure that during the practice activation the distance to
people and objects is approximately 1 m (3.28 feet) in order to
avoid adverse affects. Activate the handle with a strong, rapid pull.
English
you pulling on it. Do not pull
the charged activation handle,
the system will be activated! If
you are not able to remove the
activation handle refer to
point 12.1.
Remove the handle when
ABS backpack is not in use
and store it in the pocket
located at the hip strap.