Kyocera FS-1714M Manuel D'utilisation page 7

To select the MICR font (FS-1714M/FS-3718M):
Press the MODE key to enter Mode Selection Menu. Then, press the + or – key until the message
1.
display indicates FONT >. If the font type displayed is Internal, go to step 2. If it is
Option, go to step 5.
Font
Internal
Press the ENTER key so that ? flashes.
2.
Font
? Internal
Press the + or – key until Option is displayed.
3.
Font
? Option
Press the ENTER key so that ? disappears.
4.
Font
Option
5.
Press the key to enter font Selection mode. Font number is displayed.
> M000
M000 : E13-B
M001 : CMC-7
Press the ENTER key so that ? flashes.
6.
>?M000
Press the + or – key until the desired font number is displayed.
7.
>?M001
Press the ENTER key so that ? disappears.
8.
> M001
Press the EXIT key. This returns the menu display to Ready. The MICR font has been selected.
9.
Ready
>
>
5