Kyocera FS-1714M Manuel D'utilisation page 5

Maintenance Messages
This section introduces messages that are displayed exclusively by the MICR printer. For other
messages, please refer to the printer's original User's Manual.
Message
Top cover
Open
Missing
Developer unit
Toner low
Clean printer
[FS-1714M/FS-3718M only]
Toner low
[FS-7028M only]
Replace Toner
Clean printer
MK
Near end
Optional Paper Feeder
You can upgrade your Kyocera MICR printer with optional lockable paper feeders for securely stor-
ing check stock. The following table shows the paper handling upgrade options for your Kyocera
MICR printer.
Model Name
Paper Size
Maximum Output
Maximum number of feeders
Open the top cover, then close tightly.
[FS-1714M/FS-3718M only] The wrong type of toner container is
installed. Install a toner container made for use with MICR print-
ers.
The developer unit is not installed.
Securely install the developer unit in the printer. (For details, see
the printer's original User's Manual.)
[FS-7028M only] The wrong type of toner container is installed.
Install a toner container made for use with MICR printers.
Prepare new toner kit. (This message indicates that the toner con-
tainer is nearly empty.)
Replace the toner container with a new one and clean the printer
as explained in the printer's original User's Manual that is pro-
vided with each new toner kit.
The printer does not operate when this message is displayed.
The MICR maintenance kit should be replaced within 3,000
pages. Call your Kyocera MICR reseller to schedule replacement
of maintenance kit.
FS-1714M
PF-21L
Letter
500
2
Corrective Action
FS-3718M
PF-21L
Letter
500
2
FS-7028M
PF-30L
Universal
1,000
3
3