Raider RDP-SBRH20 Mode D'emploi Original page 11

1. General instructions for safe operation.
Read all instructions carefully. Failure to follow the instructions below may result in electric shock, fire and / or serious
injury. Keep these instructions in a safe place.
1.1. Safety at work.
1.1.1. Keep your workplace clean and well lit. Crash and inadequate lighting can contribute to the occurrence of an
accident at work.
1.1.2. Do not operate the punch in environments with an increased risk of explosion, near flammable liquids, gases or
dust.
During work, sparks can be released from the punch and can ignite dust or vapors.
1.1.3. Keep children and side faces at a safe distance while working with the punch.
If your attention is diverted, you may lose control of the punch.
1.2. Electricity safety.
Avoid touching your body to grounded bodies, such as pipes, heaters, stoves and refrigerators. When your body is
grounded, the risk of an electric shock is greater.
Protect your hammering machine from rain and moisture.
The penetration of water in the punch increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Stay focused, keep a close eye on your actions and act cautiously and reasonably. Do not use the punch when you
are tired or under the influence of narcotics, alcohol or drugs.
A moment of distraction when working with the punch can result in extremely severe injuries.
1.3.2. Work with protective clothing and always with safety glasses.
Wearing personal protective equipment, such as a breathing mask, tight tightly closed shoes with a stable grapple,
protective helmet and silencers, reduces the risk of an accident at work.
1.3.3. Avoid the risk of inadvertent insertion of the punch. When you carry the punch and hold your finger on the breaker,
there is a risk of an accident at work.
1.3.4. Before turning on the punch, make sure you remove all the tools and keys from it.
A helper forgotten on a rotating unit can cause injuries.
1.3.5. Avoid the unnatural positions of the body. Work in a stable position of the body and at any moment maintain
balance. This will allow you to control the punch better and safer if an unexpected situation arises.
1.3.6. Work with appropriate clothing. Do not work with wide clothing or jewelery. Keep your hair, clothes, and gloves at
a safe distance from the rotating units of the punch. Wide clothes, ornaments, long hair can be caught and dragged by the
chuck.
1.3.7. If it is possible to use an external aspiration system, make sure it is on and functioning properly. The use of an
aspiration system reduces the risks due to the dust released.
1.4. Careful attitude towards the punch.
1.4.1. Do not overload the punch. Only use the punch according to its purpose. You will work better and safer when using
the appropriate punch in the load range specified by the manufacturer.
1.4.2. Do not use a perforator whose breaker is damaged.
A punch that can not be shut off and switched on in the manner provided by the manufacturer is dangerous and needs
to be repaired.
1.4.3. Keep the punch in places where it can not be reached by children. Do not allow it to be used by people who are
unfamiliar with the way they work with them and have not read these instructions. When in the hands of inexperienced users,
the punch can be extremely dangerous.
1.4.4. Keep your hammering machine with care. Verify that the movable units function flawlessly, do not clamp, have
broken or damaged parts that break or change the functions of the punch. Before using the punch, make sure the damaged
parts are repaired. Many accidents at work are due to poorly maintained power tools and appliances.
1.4.5. Keep the cutting tools always well sharpened and clean. Well-maintained cutters sharp edges have less resistance
and are easier to work with.
1.4.6. Use the punch, accessories, and tools according to the manufacturer's instructions. Also keep in mind the specific
working conditions and operations you must complete. The use of a perforator for applications other than those specified by
the manufacturer increases the risk of accidents at work.
1.5. Safety instructions specific to the drilling machine you purchased.
When working with impact-boring machines, wear earphones. The impact of loud noise may damage your hearing. Loss
of control over the machine can to cause accidents at work.
11