General Information; Special Instructions; Safety Information; Applications - Jura CLARIS Guide D'installation Et D'utilisation

1. General information

The filter system consists of the following parts (see page 3):
• Filter head
• Mounting bracket
• Filter cartridge
The filter cartridges are available in 4 sizes (S/M/L/XL).
The corresponding filter head and mounting bracket fits to all cartridge sizes.

2. Special instructions

2.1 Staff
The installation and maintenance of the fi lter systems may only be carried out by trained and authorised personnel.
2.2 Disclaimer
Information contained in this document is believed to be accurate at the time of publication,
but does not constitute a contractual offer. The right is reserved to alter specifi cations without prior notice. Illustrations
and tabulated data are for guidance only. JURA does not assume liability for any damages, including subsequent
damages, that may result from incorrect installation or usage of the products.
JURA does not assume liability for damage caused by using parts from other manufacturers.
2.3

Safety Information

• Only cold water of potable water quality may be used to feed the system.
• All components must be stored dry within a temperature limit of -15° to 45° C (5 °F to 113 °F)
• Water of unsafe or unknown microbiological quality may not be used.
• The system must be sited in a frost-proof place and be protected from direct sunlight.
• The system must not come into contact with chemicals, solvents or other vapours.
• Before commissioning the filter system, the fed appliance must be free of lime.
• The filter cartridge must not be opened or damaged.
• The filter cartridge should be replaced if not used for very long periods.
• After 5 years of use (latest 6 years after production date) the filter head and wall mounting bracket must be
replaced (this also applies to hoses and gaskets) – please check the date on the production stamp.
• After a longer downtime or maintenance works rinse the system thoroughly – see table for flush volume.
Filter system
CLARIS S
CLARIS M
CLARIS L
CLARIS XL

3. Applications

The CLARIS filter systems are typically used to feed the following appliances:
• Coffee and espresso machines
• Drinks vending machines
• Combi Steamers and Self-Cooking Systems
• Steam Cookers and Ovens
The systems can be operated horizontally or vertically, depending on the space available.

4. Function

The CLARIS filter systems use ion-selective filter medium to reduce the carbonate hardness of potable water.
The DuoBlend ® bypass valve in the filter head can be used to precisely adjust the carbonate hardness of the filtered
water and to adapt it to the application.
The filter material also reduces heavy metal ions like lead, copper and cadmium.
The integrated active carbon block reduces undesirable cloudiness, organic impurities, odour and taste and chlorine
residue from the filtrate and bypass water.
Flush volume
after 1 week of stagnation
2 liters (0.5 US gal)
3 liters (1.0 US gal)
5 liters (1.5 US gal)
8 liters (2.0 US gal)
9
Flush volume
after 4 weeks of stagnation
10 liters (3 US gal)
15 liters (4 US gal)
25 liters (7 US gal)
40 liters (11 US gal)