Cleaning And Care - Fujitsu AIRSTAGE ARXB07L Mode D'emploi

CLEANING AND CARE

CAUTION!
Cleaning the air filter
Cleaning
Cleaning the air filter
Remove dust with a vacuum cleaner or by washing. After washing, be sure to allow it to dry thoroughly in a shady place
before reinstalling.
When not using for an extended period
Leave the breaker on for at least 12 hours before starting operation when it is to be used again.
En-5
06H002_9374343027_en
G Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
G Do not stand on an unstable platform when cleaning.
G When removing and replacing the air filters, be sure not to touch the heat exchanger, as per-
sonal injury may result.
G When cleaning the unit's body, do not use water hotter than 40 °C, harsh abrasive cleansers, or
volatile agents like benzene or thinner.
G If dirt is allowed to accumulate on the air filter, air flow will be reduced, lowering operating
efficiency and increasing noise.
During periods of normal use, the air filter should be cleaned every two weeks.
5 9/7/06, 8:43 AM