I.SOUND Universal Guide De L'utilisateur page 3

Removing the device cradle
1. Unscrew the screw cap by turning it counter-clockwise.
2. Pull the cradle o the Cup Holder Mount.
Using the Cup Holder Mount in your vehicle
1. Put the Cup Holder Mount into a desired cup holder and
push down until the mount is secure.
NOTE: The Cup Holder Mount may not t in all vehicle models.
2. Insert your device into the device cradle.
Removing the Cup Holder Mount om
your vehicle
1. Remove your device om the device cradle.
2. Pull the Cup Holder Mount out of the cup holder until
fully released.
How to use the device cradle
1. Push the center release bu on on the cradle and push up to
extend the cradle to its most extended position.
2. Place your device into the cradle and push down the top of
the cradle until it clicks into a locked and secured position.
NOTE: Be sure to push your device all the way in until the back
touches the cradle before locking into position.