Office Star Products work smart 2907 Instructions De Montage

7
17
10
11
5
17
6
16
12
8L
15
9L
13
14
4
3
1
2
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier que les quantités des pièces
reçues sont correctes.
ÉTAPE 1 Insérer cinq Roulettes (2) dans la Base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la Roulette (2) s'enclencher. Insérer le
Cylindre pneumatique (3) dans la Base (1) et glisser les Soufflets (4) sur le Cylindre pneumatique (3).
ÉTAPE 2 Fixez le support du dossier (10) au dossier (7) à l'aide de la vis du dossier (11). SERREZ TOUTES LA VIS (11).
ÉTAPE 3 Fixez le mécanisme (5) au coussin de siège (6) avec la flèche dirigée vers l'avant du fauteuil à l'aide de six vis de mécanisme (13).
SERREZ TOUTES LES VIS (13).
ÉTAPE 4 Fixez les coussin de bras (8L et 8R) au bras (9L et 9R) en utilisant deux vis de bras (15) pour chaque bras. SERREZ TOUTES LES VIS DU
BRAS (15) AVEC LE LOURNE-A-VIS DE PHILLIPS (NON FOURNI). Fixez les bras (9L et 9R) au coussin de siège (6) à l'aide d'un bouton de réglage
avec rondelles (14) pour chaque bras. SERREZ TOUTES LES BOUTON DE RÉGLAGE (14).
ÉTAPE 5 Glissez le Housse de dossier (16) sur le Support du Dossier (10). Fixez le support de dossier (10) à l'arrière du coussin de siège (6) à l'aide d'une
vis du support de dossier (12). SERREZ TOUTES LES VIS (12).
ÉTAPE 6 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
2907 / EC4300 / EC4350
FAUTEUIL DE DIRECTION
INSTRUCTIONS DE MONTAGE
8R
15
9R
14
17
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3. Vérin pneumatique . . . . . . . . . . . . . . . . . . .1
4. Souflett . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
5. Mécanisme . . . . . . . . . . . . . . . . . . . . . . . . .1
6. Coussin du siège . . . . . . . . . . . . . . . . . . . . .1
7. Dossier . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
8. Coussin de bras (8L et 8R) . . . . . . . . . . . . .2
9. Bras (9L et 9R) . . . . . . . . . . . . . . . . . . . . . .2
10. Support de dossier . . . . . . . . . . . . . . . . . .1
11. Vis du dossier . . . . . . . . . . . . . . . . . . . . . .1
12. Vis de support de dossier . . . . . . . . . . . . .1
13. Vis de mécanisme . . . . . . . . . . . . . . . . . . .6
14. Bouton de réglage avec rondelles . . . . . . .2
15. Vis à bras . . . . . . . . . . . . . . . . . . . . . . . . . .4
16. Housse de dossier . . . . . . . . . . . . . . . . . . .1
17. Clé allen . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Le Tourne-a-vis de Phillips est aussi besoin pour
l'assemblage (non fourni).
© Office Star Products septembre 2020
7
2907
QTÉ
1
2
EC4350
WORK SMART LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 275 lbs. or less. The BC9601
is for persons weighing 300 lbs. or less. The BC9602 is for persons weighing 400 lbs. or less. The BC9603 is for persons weighing 500 lbs. or less. EX1098, EC1283C &
ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism,
rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for
incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year
warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department
will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
2907 / EC4300 / EC4350
MANAGER'S CHAIR
OPERATING INSTRUCTIONS
FEATURES
• SEAT/BACK ANGLE ADJUSTMENT & FORWARD TILT
To adjust Seat/Back angle, slightly loosen tension knob (6), lift lever (4), carefully
lean back & pull lever (1) towards you. Leave lever (4) up for free float or push
lever (4) down to lock seat into position.
NOTE: Please do not loosen tension knob (6) completely.
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (2) up. To lower seat
height sit on chair and pull lever (2) up.
NOTE: It is normal for chair to slightly lower under body weight.
• SEAT SLIDER ADJUSTMENT
To slide seat forward or backward, pull bar (3) out. Release bar (3) to lock desired
seat position.
• SEAT ANGLE ADJUSTMENT
To adjust seat angle, lift lever (4). Leave lever up for free float or push
lever (4) down to lock.
• BACKREST ANGLE ADJUSTMENT
To adjust back angle lift lever (5). Leave lever (5) up for free float or push
lever (5) down to lock at any angle.
• TILT TENSION ADJUSTMENT
To adjust title tension, Turn knob (6) clockwise to increase tension and counter-
clockwise to decrease or ease the tension.
NOTE: Please do not loosen tension knob (6) completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (7) in to allow the arms to move up or down
freely. Release the button (7) once the desired height is reached.
EC4300
WARNING
1. Use this product only one person at a time.
6
2. Do not use this chair unless all bolts screws and knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every three months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as head covering.
It may cause suffocation.
3
4 6. Do not use chair as a stepladder.
5
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.