Safety Instructions - Seliger Aqualight Power LED Mode D'emploi

SAFETY INSTRUCTIONS

When using the Aqualight POWER LED be sure to take note of the following safety instructions:
DANGER OF ELECTRIC SHOCK!
Danger of electrocution when the nebuliser is connected to 230 V (mains electricity).
• The Aqualight POWER LED may only be operated using the original transformer.
• Do not use the Aqualight POWER LED if the connecting cable show any signs of damage. Always perform
a visual check of all product components before use. Damaged products must not be used. If one of the
product components is damaged, please
have it examined by a qualifi ed electrician.
• The information on the model plate of the transformer must match the mains power supply.
• Never carry the spotlight or the transformer by their cables. Never unplug the nebuliser from the mains
supply by pulling on the cable. Keep the cable protected from heat, oil and sharp edges. Do not expose the
transformer to direct sunlight, rain or mechanical stress. The transformer has been certifi ed for outside use.•
Disconnect the Aqualight from the mains supply when performing maintenance work or if you do not intend
to use the nebuliser for a longer period of time.
• For safety reasons, the spotlights must be powered only by the supplied transformer. Two transformers must
not be connected in parallel.
• The mains supply to the transformer must be fi tted with a residual current circuit breaker designed to trip on
a leakage current of 30 mA (DIN VDE 0100-702). Please ask a specialised dealer for more information.
• The total wattage of the connected lights must not exceed the rated power of the transformer.
• For Switzerland: In Switzerland mobile appliances which are used outdoors, must be connected via a
residual current device.
• Use only original seliger
liability for damage caused by incorrect use of this product, or for damage caused by the product to plants or
animals.
14 ENGLISH
®
spare parts, otherwise correct operation cannot be guaranteed. We accept no