Akitio 10G/NBASE-T Guide D'installation

Driver Installation
Ethernet driver for Microsoft Windows 7 & 10
https://www.akitio.com/software/10g-ethernet-driver-a
Download and install the corresponding driver for your system.
Laden Sie den entsprechenden Treiber für Ihr System herunter und
installieren Sie ihn.
Descargue e instale el controlador que corresponda a su sistema.
Téléchargez et installez le pilote correspondant à votre système.
請下載並安裝系統相應的驅動程式 。
请下载并安装系统相应的驱动程序。
당신의 시스템에 적합한 드라이버를 내려받고 설치하십시오.
システムの対応するドライバをダウンロードしてインストールして下さい。
Note for Mac users:
On macOS, no driver installation is required but the
minimum system requirements are macOS 10.13.4 and later
Mac and macOS are trademarks of Apple Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
an OWC brand
10G/NBASE-T™ PCIe Network Card
EN ES DE
Setup guide - Guía de configuración - Setup-Anleitung - Guide d'installation
安裝手冊 - 安装手册 - 설치 안내서 - セッ トアップガイド
To download the latest version of this document,
please visit our website at
https://www.akitio.com/support/user-manuals
E15-575M1AA001
© 2019 inXtron, Inc. All rights reserved.
AKiTiO assumes no responsibility for any errors or differences between the product you
may have and the one mentioned in this document and reserves the right to make
changes in the specifications and/or design of this product without prior notice. The
diagrams contained in this document are for reference and may not fully represent the
real product. AKiTiO assumes no responsibility for any loss of data or files.
www.akitio.com
FR CH KO P
J
Version 1.0
5/13/2019